254 found, showing page 7 of 17
20" BAR SN 3/8-050
- 3/8" pitch sprocket nose
- 20" length with 72 tooth chain
- .050" gauge
View Details
Call for Price
"20"" BAR ST 325-063 "
- .325" pitch sprocket nose
- 20" length with 81 tooth chain
- .063" gauge
View Details
Call for Price
33RM 60E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 33RM is part of the Stihl Rapid Micro series. 33RM has semi-chisel cutters which cut relatively fast, and stay sharp much longer in abrasive conditions as compared to chisel chain. This chain has reduced vibration features and no kickback reduction features (See warnings below), so it is recommended for professional use only.
- Pitch .375" (3/8")
- Gauge .050" (1.3mm)
- Sequence Standard
- Cutter Type Semi-Chisel
- Recommended File Size 5.2mm (13/64")
- Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
- Recommended Bar Lengths 16"-36" (40-90cm)
- Kickback Reduction Features None
View Details
Call for Price
33RM 66E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 33RM is part of the Stihl Rapid Micro series. 33RM has semi-chisel cutters which cut relatively fast, and stay sharp much longer in abrasive conditions as compared to chisel chain. This chain has reduced vibration features and no kickback reduction features (See warnings below), so it is recommended for professional use only.
- Pitch .375" (3/8")
- Gauge .050" (1.3mm)
- Sequence Standard
- Cutter Type Semi-Chisel
- Recommended File Size 5.2mm (13/64")
- Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
- Recommended Bar Lengths 16"-36" (40-90cm)
- Kickback Reduction Features None
View Details
Call for Price
33RM 72E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 33RM is part of the Stihl Rapid Micro series. 33RM has semi-chisel cutters which cut relatively fast, and stay sharp much longer in abrasive conditions as compared to chisel chain. This chain has reduced vibration features and no kickback reduction features (See warnings below), so it is recommended for professional use only.
- Pitch .375" (3/8")
- Gauge .050" (1.3mm)
- Sequence Standard
- Cutter Type Semi-Chisel
- Recommended File Size 5.2mm (13/64")
- Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
- Recommended Bar Lengths 16"-36" (40-90cm)
View Details
Call for Price
"16"" BAR ST 3/8-043 PM "
- 3/8" low profile pitch
- Sprocket nose
- 16" length with 55 tooth chain
- .043" gauge
View Details
Call for Price
"18"" BAR ST 325-063 FARM BOSS"
- .325" pitch
- Sprocket nose
- 18" length with 74 tooth chain
- .063" gauge
View Details
Call for Price
"20"" BAR ST 325-063 FARM BOSS"
- .325" pitch sprocket nose
- 20" length with 81 tooth chain
- .063" gauge
View Details
Call for Price
33RMC3 60E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 33RMC3 is part of the Stihl Rapid Micro Comfort 3 series. This chain has reduced kickback and low vibration features. 33RMC3 has semi-chisel cutters which will not cut as fast as chisel chain cutters, but it is much more forgiving if it contacts abrasive materials like dirt and sand.
- Pitch .375" (3/8")
- Gauge .050" (1.3mm)
- Sequence Standard
- Cutter Type Semi-Chisel
- Recommended File Size 5.2mm (13/64")
- Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
- Recommended Bar Lengths 16"-36" (40-90cm)
- Kickback Reduction Features Single-Humped Drive Link
View Details
Call for Price
33RMC3 66E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 33RMC3 is part of the Stihl Rapid Micro Comfort 3 series. This chain has reduced kickback and low vibration features. 33RMC3 has semi-chisel cutters which will not cut as fast as chisel chain cutters, but it is much more forgiving if it contacts abrasive materials like dirt and sand.
- Pitch .375" (3/8")
- Gauge .050" (1.3mm)
- Sequence Standard
- Cutter Type Semi-Chisel
- Recommended File Size 5.2mm (13/64")
- Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
- Recommended Bar Lengths 16"-36" (40-90cm)
- Kickback Reduction Features Single-Humped Drive Link
View Details
Call for Price
33RMC3 72E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 33RMC3 is part of the Stihl Rapid Micro Comfort 3 series. This chain has reduced kickback and low vibration features. 33RMC3 has semi-chisel cutters which will not cut as fast as chisel chain cutters, but it is much more forgiving if it contacts abrasive materials like dirt and sand.
- Pitch .375" (3/8")
- Gauge .050" (1.3mm)
- Sequence Standard
- Cutter Type Semi-Chisel
- Recommended File Size 5.2mm (13/64")
- Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)
- Recommended Bar Lengths 16"-36" (40-90cm)
- Kickback Reduction Features Single-Humped Drive Link
View Details
Call for Price
63PMC 50E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 63PM is part of the Stihl Picco Micro series. 63PM has semi-chisel cutters which are easy to sharpen and it will stay sharp longer than a chisel chain. This chain has no significant kickback reduction features (See warnings below), and is recommended for professional use only.
- Pitch 3/8" Low Profile (Picco)
- Gauge .050" (1.3mm)
- Sequence Standard
- Cutter Type Low Profile Semi-Chisel
- Recommended File Size 4.0mm (5/32")
- Recommended Saw Sizes up to 2.5 cubic inches (40cc)
- Recommended Bar Lengths 12"-18" (30-45cm)
View Details
Call for Price
63PMC 62E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 63PM is part of the Stihl Picco Micro series. 63PM has semi-chisel cutters which are easy to sharpen and it will stay sharp longer than a chisel chain. This chain has no significant kickback reduction features (See warnings below), and is recommended for professional use only.
- Pitch 3/8" Low Profile (Picco)
- Gauge .050" (1.3mm)
- Sequence Standard
- Cutter Type Low Profile Semi-Chisel
- Recommended File Size 4.0mm (5/32")
- Recommended Saw Sizes up to 2.5 cubic inches (40cc)
- Recommended Bar Lengths 12"-18" (30-45cm)
View Details
Call for Price
